SIEMENS SIMATIC S7-300 6ES7322-1BH01-0AA0 PLC I/O Module Digital 16 DQ – NEW SIPLUS S7-300 SM 322-20-pole based on 6ES7322-1BH01-0AA0 with conformal coating, -25…+70 °C, digital output isolated 16 DQ, 24 V DC, 0.5 A, total current 4 A/group (8 A/module)

Specifications

Desc
Accessory Type PLC I/O Module Range SIMATIC Series SIMATIC S7-300 Series Number of Outputs 16 Output Type Digital For Use With SIMATIC S7-300 Series Supply Voltage 24 V Output Current 4 A Cable Length 600 (unshielded) m, 1000 (shielded) m Maximum Operating Temperature +60°C Dimensions 125 x 40 x 120 mm

Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 20.4 V ● permissible range, upper limit (DC) 28.8 V Input current from load voltage L+ (without load), max. 80 mA from backplane bus 5 V DC, max. 80 mA Power loss Power loss, typ. 4.9 W Digital outputs Number of digital outputs 16 Short-circuit protection Yes; Electronic ● Response threshold, typ. 1 A Limitation of inductive shutdown voltage to L+ (-53 V) Controlling a digital input Yes Switching capacity of the outputs ● on lamp load, max. 5 W Load resistance range ● lower limit 48 Ω ● upper limit 4 kΩ Output voltage ● for signal “1”, min. L+ (-0.8 V) Output current ● for signal “1” rated value 0.5 A ● for signal “1” permissible range for 0 to 40 °C, min. 5 mA ● for signal “1” permissible range for 0 to 40 °C, max. 0.6 A ● for signal “1” permissible range for 40 to 60 °C, min. 5 mA ● for signal “1” permissible range for 40 to 60 °C, max. 0.6 A ● for signal “1” minimum load current 5 mA ● for signal “0” residual current, max. 0.5 mA Output delay with resistive load ● “0” to “1”, max. 100 µs ● “1” to “0”, max. 500 µs Parallel switching of two outputs ● for uprating No ● for redundant control of a load Yes Switching frequency ● with resistive load, max. 100 Hz