SIEMENS SIMATIC DP S7 ET200s PLC 6ES7132-4BD32-0AA0 , 5 electronic modules for ET 200S, 4 DO standard 24VDC/2 A, 15 mm width, 5 units per packing unit.

Specifications

Desc
Accessory Type PLC I/O Module Range SIMATIC Series 6AG1 Output Type Digital Number of Outputs 4 For Use With SIMATIC ET 200S Series Supply Voltage 24 V Output Current 2 A Dimensions 81 x 15 x 52 mm

Supply voltage Reverse voltage protection Yes; when using the same load voltage as on the power module Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 10 mA; Per channel from backplane bus 3.3 V DC, max. 10 mA Power loss Power loss, typ. 1.6 W Address area Address space per module ● Address space per module, max. 1 byte ● with packing 4 bit Digital outputs Type of digital output Source output (PNP, current-sourcing) Number of digital outputs 4 Short-circuit protection Yes ● Response threshold, typ. 2.8 to 7.2 A Limitation of inductive shutdown voltage to Typ. L+ (-55 to -60 V) Controlling a digital input Yes Switching capacity of the outputs ● on lamp load, max. 10 W Load resistance range ● lower limit 12 Ω ● upper limit 3 400 Ω Output voltage ● for signal “1”, min. L+ (-1.0 V) Output current ● for signal “1” rated value 2 A ● for signal “1” permissible range, min. 7 mA ● for signal “1” permissible range, max. 2.4 A ● for signal “0” residual current, max. 0.1 mA Output delay with resistive load ● “0” to “1”, max. 50 µs; Typ. 45 µs ● “1” to “0”, max. 120 µs; Typ. 90 µs Parallel switching of two outputs ● for uprating No ● for redundant control of a load Yes; per module